If you need to uninstall Windows Subsystem for Linux (WSL) on Windows 10, follow these steps. First, you’ll remove the WSL feature itself, then you’ll uninstall any Linux distributions installed on your machine. Lastly, clean up any remaining files or folders. This guide will walk you through each step to ensure WSL is entirely removed from your system.
How to Uninstall WSL in Windows 10
Removing WSL from your Windows 10 computer involves several steps, but it’s a straightforward process. Following these instructions will ensure you completely remove WSL and any associated files.
Step 1: Open Control Panel
Open the Start menu, search for “Control Panel,” and click to open it.
The Control Panel is where you can access many of the settings and features on your Windows computer. Here, you’ll be able to turn off WSL.
Step 2: Go to Programs and Features
In the Control Panel, navigate to “Programs” and then click on “Programs and Features.”
In this section, you can see a list of all the software installed on your computer. You’ll be looking for Windows features here.
Step 3: Turn Windows Features On or Off
On the left side of the Programs and Features window, click “Turn Windows features on or off.”
This will bring up a new window where you can enable or disable various Windows features, including WSL.
Step 4: Uncheck Windows Subsystem for Linux
In the Windows Features window, find “Windows Subsystem for Linux” and uncheck the box next to it. Click “OK” to confirm.
Unchecking this box will disable WSL on your system. This step might take a few minutes to complete.
Step 5: Restart Your Computer
After making these changes, restart your computer to ensure that WSL is fully disabled.
Restarting your PC will apply the changes and finalize the uninstallation of WSL from your system.
Step 6: Uninstall Linux Distributions
Open the Start menu, search for the Linux distros you’ve installed (like Ubuntu), right-click, and choose “Uninstall.”
This will remove the individual Linux distributions from your computer. Make sure to repeat this step for every Linux distro you have.
Step 7: Clean Up Remaining Files
Navigate to C:Users[YourUsername]AppDataLocalPackages and delete any folders related to your Linux distributions.
This step ensures that there are no leftover files from your WSL installation, giving you a fresh start.
Once you’ve completed these steps, WSL will be completely uninstalled from your system. Your computer will no longer have any Linux subsystems, and all associated files will be removed.
Tips for Uninstalling WSL in Windows 10
- Backup Your Data: Before uninstalling, make sure to back up any important data from your Linux distributions.
- Check for Dependencies: If you use software that relies on WSL, be aware that uninstalling it might affect those programs.
- Clear Cache: Consider clearing your Windows cache to ensure no remnants of WSL remain.
- Update Windows: After uninstalling, check for any Windows updates to keep your system running smoothly.
- Reinstalling WSL: If you change your mind, you can always reinstall WSL through the same Windows Features menu.
Can I reinstall WSL after uninstalling it?
Yes, you can easily reinstall WSL by going back to the Windows Features menu and checking the “Windows Subsystem for Linux” box.
Will uninstalling WSL affect my Windows system?
Uninstalling WSL will not affect your Windows system’s overall functionality but will disable any Linux environments you have set up.
Do I need to uninstall WSL before upgrading to Windows 11?
No, you do not need to uninstall WSL before upgrading, but it’s a good idea to ensure it’s compatible with your new OS version.
How can I backup my Linux distributions?
You can backup your Linux distributions by copying the relevant files from the AppDataLocalPackages folder before you uninstall WSL.
Does uninstalling WSL free up disk space?
Yes, uninstalling WSL and its associated Linux distributions will free up disk space on your computer.
Summary
- Open Control Panel: Access the Control Panel from the Start menu.
- Go to Programs and Features: Navigate within the Control Panel.
- Turn Windows Features On or Off: Access Windows features.
- Uncheck Windows Subsystem for Linux: Disable WSL.
- Restart Your Computer: Apply the changes.
- Uninstall Linux Distributions: Remove individual distros.
- Clean Up Remaining Files: Delete leftover files.
Conclusion
Uninstalling WSL in Windows 10 is a fairly simple process if you follow the steps outlined above. By taking the time to properly uninstall and clean up, you can ensure that your system remains tidy and free of unnecessary files. Remember, if you ever need WSL again, it’s just as easy to reinstall.
For further reading, Microsoft’s official documentation provides in-depth details on managing WSL and its various features. Whether you’re looking to free up some space or troubleshoot an issue, knowing how to uninstall WSL can come in handy. So, don’t hesitate to dive in and clean up your system when needed.
Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.
After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.
His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.
Read his full bio here.
Printers can be a source of problems for many computer users. They have a lot of moving parts that need to be replaced, and they require constant replenishment of very expensive ink and toner.
A printer that was previously working perfectly may even start saying that it’s offline, such as described in this article .
Occasionally a printer will break, stop working, or get replaced, so you need to uninstall it from your computer.
Often this can be as simple as removing the device from Windows 7. But it can also be a little more complicated than that, especially if the problem that you were having was related to a bad driver installation or a hidden file stuck in your print queue.
Fortunately, our guide below can provide some solutions to the problems that you are having as you try to completely remove a printer from your Windows 7 computer.
Removing a Printer and Printer Driver in Windows 7
The guide below is going to show how to first remove a printer in Windows 7, then how to remove a print driver in Windows 7, then a couple of troubleshooting steps if a print driver will not uninstall.
You are going to be performing some actions that require you to have administrator access to Windows 7, so make sure that you are either signed into an Administrator account, or that you have the administrator credentials for your computer.
Before you get started, check that your printer doesn’t have a specific program installed with it. In some cases uninstalling the program for the printer can take care of the entire uninstall process for you. Simply disconnect the printer cable from the computer first, then uninstall the printer program like any other program in Windows 7 by following the steps in this article .
If this is not an option for you, however, follow the steps below.
Step 1: Disconnect the printer cable from the computer, if it is a USB connection.
Step 2: Click the Start button at the bottom-left corner of the screen.
Step 2: Click Devices and Printers in the column at the right side of the menu.
Step 3: Locate the printer that you want to remove. In this case we are removing the Brother MFC 490CW.
Step 4: Right-click the printer, then click Remove Device .
Step 5: Click the Yes option to confirm that you want to remove the printer. Don’t close this window just yet, though.
At this point the printer is removed from your computer, and you will no longer be able to print to it. For a lot of people, this is a sufficient stopping point. But the driver is still on the computer, and if you have been trying to re-install the printer but keep encountering an error, then it could be an issue with the driver. So you can follow the steps below to delete the print driver as well.
Step 6: Click another printer icon once to select it, then click the Print Server Properties option in the blue bar at the top of the window.
Step 7: Click the Drivers tab at the top of this window.
Step 8: Click the driver for the printer you just removed, then click the Remove button .
Step 9: Click the Remove driver and driver package option, then click the OK button.
Step 10: Click the Yes button to confirm that you want to delete the driver and driver package.
Step 11: Click the Delete button to complete deletion of the printer driver.
You might get an error at this point saying that the driver is in use and that it cannot be deleted. This can occur if there is a document that is still stuck in the print queue , so we need to take a couple more steps.
Step 12: Click the Start button at the bottom-left corner of your screen again, type “ Services ” into the search bar at the bottom of the menu, then hit Enter on your keyboard.
Step 13: Scroll down and select the Print Spooler option.
Step 14: Right-click on Print Spooler , then click the Stop option. Leave this window open for now.
Step 15: Click the Start button at the bottom-left corner of the screen, then click Computer in the column at the right side of the window.
Step 16: Double-click your hard drive at the center of the window.
Step 17: Double-click the Windows folder, double-click System32 , double-click spool , then double-click PRINTERS . So the location you want to be at now is C:\Windows\System32\spool\PRINTERS , which should look similar to the image below.
Step 18: Press Ctrl + A on your keyboard to select everything in this folder, press the Delete key on your keyboard (the actual key that says “Delete” or “Del”. Not the “Backspace” key), then click Yes to confirm that you want to delete these files.
Step 19: Click Continue and provide Administrator access to confirm that you want to delete these files.
Step 20: Return to the Services window that we left open in Step 14, scroll to Print Spooler , right-click it, then click Start .
Step 21: Return to the Devices and Printers window that we left open all the way back in Step 5.
Step 22: Repeat Step 6 – Step 11 to delete the printer driver. The error telling you that it was in use should now be gone.
If you are still unable to delete the printer driver, then restart your computer, and repeat steps 6-11 one more time. If the driver is deleting but the driver package remains, then there may be another user on your computer that has the printer installed on their profile. You will also need to delete the printer and the driver for those users as well.
If you are still experiencing problems, then you should contact your printer’s manufacturer for additional troubleshooting steps related to that specific printer model.
If you’re getting rid of a problematic printer and are in search of a good new one, the Brother HL-2270DW could be the right printer for you. It is a wireless black and white laser printer that is fast, easy to use, and affordable. Check it out here .
Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.
After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.
His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.
Read his full bio here.
Featured guides and deals
